Interface
- 16-Port 10/100/1000Mbps Gigabit Ethernet RJ-45 ports
- Each port supports 52V DC power to PoE Powered Device
Power over Ethernet
- Complies with IEEE 802.3af / IEEE 802.3at Power over Ethernet
- Up to 16 IEEE 802.3af / IEEE 802.3at devices powered
- Supports PoE Power up to 30 Watts for each PoE port
- Auto detect powered device (PD)
- Circuit protection prevents power interference between ports
- Remote power feeding up to 100m
Switching
- Hardware based 10/100/1000Mbps auto-negotiation and auto MDI/MDI-X
- Flow control for full duplex operation and back pressure for half duplex operation
- Integrates address look-up engine, supporting 8K absolute MAC addresses
- 9K Jumbo Frame supports at all speed (10/100/1000Mbps)
- Automatic address learning and address aging
- Supports Pre-Energy-Efficient Ethernet (EEE) function (IEEE 802.3az)
Hardware
- - Link down power saving
- - Intelligent scales power based on cable length
- 19-inch desktop size, 1U height
- LED indicators for PoE ready and PoE activity
- Ethernet Link Energy-Saving technology
| Hardware Specification | |||
| Network Port | 16 10/100/1000Base-T auto-MDI/MDI-X RJ-45 ports | ||
| PoE Inject Port | 16-Port with 802.3af / 802.3at PoE injector function | ||
| LED Display | System Power (Green) PoE Ethernet Interfaces PoE In-Use (Orange) 10/100/1000Base-T Ports 1000 (LNK/ACT, Green), 10/100 (LNK/ACT, Orange) | ||
| Switch Architecture | Store and Forward switch architecture | ||
| MAC Address | 8K MAC address table with auto learning function | ||
| Switch Fabric | 32Gbps | ||
| Switch Throughput | 23.8Mpps@64Bytes | ||
| Jumbo Packet Size | 9K Bytes | ||
| Flow Control | Back pressure for half-duplex. IEEE 802.3x pause frame for full-duplex | ||
| Power Requirements | AC 100~240V, 50/60Hz, 3.5A max. | ||
| Power Consumption | Max. 260 watts / 885 BTU | ||
| Dimensions (W x D x H) | 445 x 207 x 45 mm (1U height) | ||
| Weight | 2.54kg | ||
| Power over Ethernet | |||
| PoE Standard | IEEE 802.3af Power over Ethernet / PSE IEEE 802.3at Enhancement Power over Ethernet / PSE | ||
| PoE Power Output | Per Port 52V DC, 300mA. max. 15.4 watts (IEEE 802.3af) Per Port 52V DC, 590mA. max. 30 watts (IEEE 802.3at) | ||
| PoE Power Budget | 220 watts | ||
| Number of PD, 7Watts | 16 | ||
| Number of PD, 15.4Watts | 14 | ||
| Number of PD, 30.8Watts | 7 | ||
| Environment | |||
| Operating environment | 0 ~ 50 degrees C | ||
| Storage environment | -40 ~ 70 degrees C | ||
| Operating Humidity | 5 ~ 95%, relative humidity, non-condensing | ||
| Storage Humidity | 5 ~ 95%, relative humidity, non-condensing | ||
| Standard Conformance | |||
| Standard Compliance |
| ||
| Regulation Compliance | FCC Class A, CE | ||
16-Port 10/100/1000Base-T IEEE 802.3 at/af PoE+ Injector (Per port 30.8 watt) (PoE Güç Bütçesi maks. 220 Watt)
Bu ürüne ilk yorumu siz yapın!